FAQ

visit the nearest authorized Farben dealer or service point

Yes. We offer a selection of exterior paints designed to withstand UV rays, humidity, and high temperatures, ideal for facades and outdoor applications.

For bulk purchases or project-based orders, please contact our sales department directly via sales@farbenpaints.com to receive a quotation and delivery terms.

Yes. We regularly conduct workshops and training sessions for painters and applicators to ensure professional usage of Farben paints and application techniques.

Yes. Our products are backed by a quality warranty against manufacturing defects, provided that all application instructions and usage guidelines are properly followed.

You can get our products from: • Authorized dealers across Egypt • Farben’s official sales branches • Direct order via phone or (soon) through our online store

Absolutely. Our technical support team offers free consultations for contractors, engineers, and real estate developers to help select the most suitable products for each surface and project type.

You can explore our wide color catalogue (Color Fan Deck) or visit any of our authorized distributors to view real samples. Our technical team is also available to help you choose the best color based on space and lighting.

Yes. Our products are manufactured with low VOC (Volatile Organic Compounds) formulas, making them safe for indoor use and environmentally friendly.

We offer a wide range of paints, including: • Interior and exterior emulsion paints • Oil-based paints • Weather-resistant coatings • Paints for metal and wood surfaces • Decorative finishes (marble effect, pearlescent, sandy textures)

✍️By using crack putty first or the designated product for that purpose.

✍️It's preferable to apply a coat of matte acrylic plastic paint, such as the following products: Swahili Marble Putty Velvet Metallic Valor It's recommended that the base coat color matches the shade of the velvet.

✍️First, clean the surface from all grease and dust. Sand the surface well. Apply a coat of matte oil-based paint on the surface first, then a treated resistant sealer. Apply two coats of matte plastic paint in the desired color.

✍️Requirements for previously painted surfaces with a plastic layer directly on walls are as follows: Ensure the quality of the existing paint. Clean the surface thoroughly. Apply a treated sealer coat on the old surface. Apply two or more coats of putty on the surface as needed.

✍️First, apply a treated sealer, then one or two coats of putty as needed. Then, apply a coat of matte acrylic plastic paint (Farben 7000) in the desired color, followed by two coats of glossy finish (Farben 7000).

✍️It's preferable to apply two coats of glossy finish plastic paint (Farben) in the same shade as the old color.

✍️Enhances the efficiency of matte surfaces, converting them to glossy, high transparency giving the surface a distinctive shine, washable with water, high coverage rate, and a strong insulating paint for stone finishes.

✍️Features long-lasting colors, high coverage rate, distinctive gloss, washable with water, high elasticity, and addresses surface fading issues both internally and externally.

✍️Weather-resistant, easy to form, long-lasting colors, high coverage rate, washable.

✍️To achieve a lighter shade, determine the type of plastic paint (matte or with gloss), then apply a small amount of the same type of plastic paint to reach the desired lighter shade. To achieve a darker shade, determine the desired color shade, then apply small amounts of Farben color concentrates accordingly.

✍️Properly insulate the surface by applying a layer of treated Farben sealer. Then, apply two coats of Farben putty as needed. Glossy finish: Apply one or two coats of matte plastic paint (Farben 7000) in the desired color. Semi-gloss finish: Apply a base coat of matte plastic paint (Farben 7000) in the desired color, then two coats of semi-gloss plastic paint (Farben 9000).

✍️Ensure the surface is clean first. Then, apply the cementitious paint, mix it well, and dilute with water as needed.

✍️First, ensure the surface is clean. Then, apply the acrylic paint according to application conditions: apply an external sealer coat, preferably in the same color as the acrylic paint layer.

✍️First, ensure complete drying and consider temperature and ventilation. Typically, wait 24 hours. For putty layers, allow at least 4 hours between each layer at 25°C with good ventilation. It's recommended to apply a putty knife after the sealer within no less than 2 hours at 25°C. Apply the plastic layer over the previous one within no less than 2 hours at temperatures not less than 25°C.

✍️By sanding the glossy surface first, then applying a treated sealer layer, followed by two coats of matte plastic paint in the desired color.

✍️Yes, it can be tinted to any desired color.

✍️Mix with water for 4 minutes. Apply directly onto the brick wall and spread.

✍️Yes, preferably use the rough textured type, not the smooth one.

✍️Laser Velvet: Contains bright reflective glitter particles. Regular Velvet: Has a sheen without the laser sparkle.

✍️*If using Eco Economy Paint: You’ll need 2 buckets (9 liters each). *If using Eco 3000 Paint: Only 1 bucket is needed.

✍️*If the plaster is rough: Start with a layer of cement-based putty. Apply a sealer coat. Then apply two coats of Max putty. *If the plaster is smooth: Start with a sealer coat. Then apply two coats of Max putty

✍️No. Mixing ready-made putty with these powders causes it to flake off the wall and weakens its hardness. It is not recommended to add Saveto or Spidaj powder.

✍️No. Instead, use Farben Blanco, which is specially designed for direct application on bricks and is available in the price list.

✍️Yes, but it should only be used on acrylic ceramic, not cement-based ceramic.

✍️You need 14 bags, with a coverage rate of 10 sqm per bag.

✍️Yes, as long as the surface is level and cement-based, whether it's flooring or wall tiles.

✍️Mix the contents of the liquid container with the powder bag. Stir well until you achieve a mortar-like paste consistency. If the mixture is too thick, add up to half a liter of water (no more). Mix thoroughly again until fully blended. Let the mixture rest for 5 minutes. Then apply it directly onto the surface.